Specifications / Consumption rates

Cleaners and Primers

*73 o F and 50% RH
*Drying Time: drying time is dependent on atmospheric conditions and the porosity of the substrate. Reduction in temperature and/or an increase in substrate (material) porosity will increase dry time.

Consumption of Adhesive and Sealant

Consumption Cleaner/Primer

Important Note:

• Coverage of cleaner and/or primer depends to a very large extent on the porosity of the substrate. The figures listed are intended for guidance only, and related to application by brush over relatively small areas. On larger jobs, these figures will be reduced by 40-50%.
• Detailed product information will be found in our technical data sheets. For further technical information and advice on specific applications, please consult Sika’s Technical Service Department.